在本教程中，他们将学习如何使用返回计时器进入。
In this tutorial, they will learn how can we use return to timer into the.

首先，众所周知，年龄越大，学习在条件输入条件打开或关闭时打开和关闭计时器。
Firstly, as we know, the older the learn to go on and off timer when the condition is input condition is on or off.

据此，我们得到了输出。
According to that, we were getting an output.

但现在想象输入条件消失或变得不正常。
But now imagine input condition is gone or became out of condition.

将会发生的情况是我们要重置计时器，或者我只想保留过去和之后的次数，当条件再次出现时。
What will happen is our going to timers, reset it or I just want to keep how many times past and after that, when the condition is on again.

我想继续在我们离开的地方指挥计时器。
I want to continue to command a timer where we left.

首先，进入计时器部分下方的右侧，您将看到计时器、印章和镜头。
So firstly, into the right side under the timer part, you will see timer, seal and takes.

这是高速，这是返回定时器功能。
This is the high speed and this is the return to timer function.

我会把它和它的名字放在这里，我们可以就这样保留，好吗？
I will put it to here and the name of this, we can leave it like that, OK?

我们所听到的，有些东西发生了变化。
And what we hear, something is changed.

我们需要一杯甜酒。
We need a cordial.

我们需要一个当前时间和值输入，这意味着如果我编写 R 工具，它将从 2 开始，您的状态和数据是什么？
We need a present time and value input means if I write the R tool, for example, it will start from two and what are you out and status and the data?

我们可以从这里经过多少次，也从这里经过多少次？
How many times passed from here we can get and also from the here?

我们可以获得计时器的状态，但让我们开始构建，例如 LP 25。
We can get the status of the timer out, but let's start building, for example, LP twenty five.

这将是我的。
It is going to be my.

输入条件我就会。
Input condition and I will.

连接到这里。
Connected to here.

现在，让我们滑雪，例如，一个想看看世界的人，根据这个，我会断断续续地进行它。
And the present time, let's ski, for example, one looking to see the world and according to that, I will make it on and off.

我们将看到后续数据。
And we will see the follow up data.

正因为如此。
Because of that.

我在这里写了一个有点大的数字，它将从零开始。
I write here a little bit huge number and it will start from zero.

例如，我们可以说听到 M30 30 的状态，我们应该在这里写什么，比如这些零？
And the status we can say to hear out M30 30, for example, and what you ought we can write here like these zero?

好的，棒极了。
OK, very good.

我准备好了。
I'm ready.

当累计定时器处于状态时我该怎么办？
Just what will I do when the retentive timer is on condition?

当其输入条件未复位时，状态变为ON。
Status is became on when the input condition of it is not resetting.

因此，我会在这里写下你的 LDP，我的计时器名称。
Because of that, I will write here your LDP, my timer name.

好吧，气候。
OK, climate.

这是状态处于活动状态时气候点状态的名称，因此这意味着当计时器打开时，我将重置计时器。
This is the name of the climate point status when the status is active, so that means when the timer is on, I will just reset my timer.

什么状态？
What status?

好的。
Okay.

我会说，好的，现在我将转换我的项目，我会说，好的。
And I will say, OK, now I will convert my project and I will say, OK.

现在我们可以进行模拟，看看会发生什么。
And now we can go to simulation and we will see what will happen.

好的。
OK.

首先，让我们从激活这个定时器线圈输入开始，我将恢复这个目的。
Firstly, let's start with to activate this timer coil input, I will restore this one aim.

二十五已经开启，我将取消此条件，您将看到九意味着这确实是你们所有人的，而不是您将看到的高的零。
Twenty five is on and I will pressing off of this condition and you will see nine means it is the one you all indeed, not the zero you will see also high.

OK，那么这个时间已经过去了，但是却因为这个而关闭了。
OK, then this time is past, but because of this is off.

它不会重置为零。
It is not reset to zero.

好的。
OK.

如果我再次激活，则继续。
If I activate again, it is continue.

九点、十点、十一点之后，就是这样。
After nine and 10 and 11, it is going like that.

所以这是一个保持计时器，我将再次按下。
So this is a retentive timer I will press on again.

好的。
OK.

比如电机，这是我的电机输出。
For example, the motor, this is my motor output.

你可以认为电机正在运行 32。
You can think like that motor is run 32.

这意味着三秒，三分二秒。
That means three second, three point two second.

好的。
OK.

再次，有人喷了OK。
And again, somebody sprays OK.

电机几乎运转了五秒钟。
The motor is almost run five seconds.

再说一次，电机运行然后停止，电机运行七秒，就像这样？
And again, motor is running and stopped and the motor is run seven seconds like that?

好的？
OK?

这意味着我们可以了解输出运行了多少次或者输出符合条件或输入条件。
And what is it means we can understand how many times the output is run or the output were on condition or input condition.

多少次了？
How many time?

和。
And.

它是打开的，我们可以看到它，75，与定时器一起工作，当条件消失时，它会立即重置，好吗？
It was on and we can see it, 75, working with the timer, when the condition goes off, it will be reset immediately, OK?

再次，我将更新此一八一，您将再次看到它运行正常，然后您将看到针迹速度已重置并且再次计数。
And again, I will update this one eight one and again you will see it is running correctly and then you will see stitch speed is reset it and it's counting again.

你会看见。
You will see.

然后我会在这里再做一件事，例如，我今年二十六岁。
Then I will do one more thing into here l d a m twenty six, for example.

你会看到状态不是。
You will see the status is not.

重置也一样，我想把它展示给这个重建的所有人，我会说，好吧。
Resetting also, I want to show it to this rebuilt all, and I will say, OK.

在这里我只会尝试一次拥有。
And here I will just try once to own.

但我们需要停止模拟器并重新启动。
But we need to stop the simulator and start again.

我们需要将这些更改写入策略中。
We need to write these changes to the policy.

M25 将会成为现实，这是真的。
And M25 is going to be true, it is true.

你现在会再次看到。
You will see now again on.

它正在数着，好吧，当这个时候会发生什么？
It is counting, OK, what will happen when when this?

我会再次展示它。
I will make it off to show it to once more.

这种风险比我们有一个输出和缝合它现在激活一百多。
This risk to one hundred than we have an output and stitch it is now activated.

如果我25岁了还可以，这个还是活跃的。
If I am 25 of OK, this still is active.

如果我右键单击并注册到监视窗口，我们可以看到该计时器的输入和输出。
If I right click and register to watch window, we can see the input and output of this timer.

你会看到状态，如果我按下去，这是真的。
You will see state, which is true if I press off.

你会发现它并非全是虚假的情况。
You will see it is not becomes of all false condition.

我可以更改以保留您从此处输出的内容。
I can change to retain what you output from here.

例如，如果我这样写你的零，它就是零，但我无法改变状态来解决它，无法通过联系人来研究它。
For example, if I write your zero like that, it is zero, but I can't change the state to solve it, to research it with the contact.

好的？
OK?

例如，如果我激活 26.
For example, if I activate and 26.

让我们。
Let's.

在这里注册观看。
Register to watch here.

一旦启动，好吗？
And once it's on, OK?

但是您会看到这不是重置，因为它只是给出一个脉冲计时器输出状态，只有一个脉冲处于活动状态。
But you will see this is not resetting because of why it was just giving one pulse timer output status, just one pulse was active.

但在此之后，激活完成，我们将它们激活到六个。
But after this is, activation is done, we activated them to six.

因此，它不会重新启动，但我只会注册观看这个，我会尝试现在就关闭它，这样我们就可以删除这个，我可以再次展示它。
Because of that, it is not restarted, but I will just register to watch this one and I will just try wants to make it off now so we can delete this one and I can show it to once more.

呃，有必要吗？
Uh, is it needed?

好的，让我们一起做。
OK, let's do it.

为了说清楚。
To make it clear.

好吧，我将再次转换我的项目。
And okay, and I will convert my project once more.

停止模拟器，然后我再次运行模拟器。
Stop the simulator and I run the simulator again.

好的，棒极了。
OK, very good.

那么当定时器正常时会发生什么呢？
Then what will happen when the timer is OK?

而且它会立即重置，然后继续使M25区域复杂化？
And it will reset immediately and then it will continue to complicate the M25 zone?

你会看见。
You will see.

他们来了。
They came.

好的。
OK.

当状态被激活时，此功能处于活动状态。
This is active when the status is activated.

好的。
OK.

会发生什么？
And what will happen?

Taimur 会很乐意接受，但现在我已经 30 岁了，因为我的跑步，我不会再上场了。
Taimur will be receptive, but at the moment I am 30, is not going to be on any more because of my run.

这已经到了设定的年份了。
This is reaching to set year.

它正在立即重置、重置、重置。
It is resetting immediately and resetting and resetting.

所以这对你来说只是一个震惊。
So this is just a shock to you.

我们怎样才能重置状态，好吗？
How can we reset the status, OK?

这可以是另一种情况，例如上午四点五点五点。
This can be another one condition like AM four and five five five.

这样故事情节就完成了我们已经学到的希望。
And like that OK for the storyline finished the hope we already learned.

我们如何在 Mr. 中使用你的计时器？
How can we use your timer in Mr.

拼图三人组中的主教塞尔斯？
Bishop Celsius in Jigsaw's three?

如果您遇到任何困难，可以立即向我提问。
If you're stuck at any point, you can ask me a question immediately.

请参阅您的互联网教程。
See your internet tutorial.